Highlights

• iQOO Pad Ultra spotted on Geekbench with Snapdragon 8 Elite Gen 6 chipset and 16GB RAM.
• The tablet is expected with 8.8-inch OLED display, slim 5.74mm design, 9,000mAh battery, and built-in cooling fan system.
• Accessories include a stretchable game controller and back grip.

iQOO Pad Ultra is expected to launch alongside the iQOO 16 later this month in China. Previous leaks have revealed some specifications of the iQOO Pad Ultra including its Snapdragon 8 Elite Gen 6 chipset. And now, the upcoming flagship tablet has appeared on the Geekbench benchmarking platform, which has confirmed details such as the chipset and RAM.

iQOO Pad Ultra Geekbench Details

An iQOO device with the model number vivo iPA2691 has appeared on Geekbench. Previous reports have associated this model number with the iQOO Pad Ultra.

The listing shows the tablet using a Snapdragon SM8975 chipset, which is the model number associated with the Qualcomm Snapdragon 8 Elite Gen 6. This suggests that the iQOO Pad Ultra will be powered by Qualcomm’s next-generation flagship processor. Qualcomm is expected to officially announce the Snapdragon 8 Elite Gen 6 alongside the Snapdragon 8 Elite Gen 6 Pro later this month at the Snapdragon Summit.

The Geekbench listing also shows benchmark scores of 1,754 points in the single-core test and 6,661 points in the multi-core test. These numbers are lower than the expected performance of the upcoming Qualcomm chipset. However, the tablet listed on Geekbench could be an early prototype, so these scores should be viewed with caution.

More importantly, the benchmark listing confirms a 16GB RAM variant of the iQOO Pad Ultra. This could be the tablet’s highest RAM configuration, although iQOO may also launch a 12GB RAM variant in China.

iQOO Pad Ultra – Specifications

The iQOO Pad Ultra is expected to feature an 8.8-inch display and is said to have a slim and lightweight design. It reportedly measures just 5.74mm in thickness and weighing 298 grams.

The tablet is also expected to feature an OLED panel with a centred single hole-punch camera and narrow bezels on all sides. Its design is tipped to include a square Deco camera section along with an air vent.

iQOO has already confirmed a built-in cooling fan measuring 30 × 30 × 3.5mm. The fan covers a 1,661mm² heat dissipation area, can spin at up to 14,500rpm and provides 0.94 CFM of airflow. The cooling system is designed to help prevent performance throttling during long gaming sessions.

The iQOO Pad Ultra is expected to feature a battery with a capacity in the 9,000mAh range.

iQOO is also preparing two dedicated accessories for the tablet. The first is a stretchable game controller featuring its own USB-C port, micro-switches and a Hall-effect joystick designed to offer better precision. The second accessory is a back grip designed to make the tablet more comfortable to hold during longer gaming sessions.

The tablet is currently tipped to be available in Shadow Black and Star Silver colour options.

iQOO Pad Ultra Launch Timeline

The iQOO Pad Ultra is widely expected to launch alongside the iQOO 16 later this month in China. However, its complete specifications and pricing have not yet been officially announced.

Pad Ultra could remain a China-only model since no global launch plans have been confirmed yet. More information is expected to emerge as the launch date approaches.

Also  Read –

https://www.mymobileindia.com/iqoo-16-and-iqoo-pad-ultra-september-launch-confirmed-ram-storage-and-key-specs-revealed/

https://www.mymobileindia.com/iqoo-16-display-unveiled-with-2k-165hz-samsung-m16-panel-and-up-to-10000-nits-brightness/

Highlights

• OPPO Find X10 series will launch in China featuring Find X10, Pro Max and X10E alongside Watch S2 and Enco X4 on September 22.
• Find X10 offers dual 200MP cameras, Tiangong OLED, Dimensity 9600M, up to 1TB storage, 8,000mAh battery; Pro Max adds triple 200MP cameras and Dimensity 9600 Pro.
• Find X10E comes in Ice Blue/Light Titanium with 12GB+256GB and 16GB+512GB options.

OPPO is set to launch its new OPPO Find X10 series in China on September 22 at 7 pm local time in China (4:30 pm IST). The lineup will include the Find X10, Find X10 Pro Max, Find X10E and the brand already confirmed their designs, colour options, memory and storage configurations via live listing pages ahead of the launch. Pre-reservations for the Find X10 series are already open in China. Meanwhile, OPPO is also expected to introduce the Watch S2 and Enco X4 at the same event.

OPPO Find X10 – Design, Colours, RAM, Storage and Specifications

The standard OPPO Find X10 will be available in Light Titanium, Ice Blue and Qingcheng colour options. The Qingcheng variant has been shown with an orange finish.

The phone will have a rounded-square rear camera module housing three lenses, while the flash will be placed outside the camera housing. Like the other models, it will feature a flat frame and rounded corners.

The Find X10 will be available in 12GB+256GB, 12GB+512GB, 16GB+512GB and 16GB+1TB configurations.

For photography, the Find X10 will feature two 200-megapixel rear cameras. OPPO has worked with Hasselblad to develop the camera hardware. OPPO executive Zhuo Shijie said the system will deliver ultra-high image quality while reducing reliance on artificial textures. The camera setup will also use a second-generation Danxia colour system.

The smartphone will feature a Tiangong Screen 2.0 OLED display, developed in partnership with Tianma. The panel is designed to reduce blue-light exposure and improve performance at low brightness levels.

The Find X10 is reportedly set to run on a 3nm MediaTek Dimensity 9600M chipset. The chip is said to be based on the MediaTek Dimensity 9500 SoC, with some changes while retaining the same CPU and GPU cores.

The Find X10 will also have a battery of up to 8,000mAh as Zhuo Shijie claims that the Find X10 lineup can offer around five years of battery life.

OPPO Find X10 Pro Max – Design, Colours, RAM, Storage and Specifications

The OPPO Find X10 Pro Max will be offered in Warm Orange, Moon White and Light Titanium colour options.

Unlike the standard Find X10, the Pro Max gets a larger rectangular camera housing for its three lenses. A separate section below the camera module houses the flash and another sensor. The phone will also feature a flat frame and rounded corners.

The Find X10 Pro Max will be available in 12GB+256GB, 12GB+512GB, 16GB+512GB and 16GB+1TB configurations.

The Pro Max will take the camera setup further with three 200-megapixel rear cameras. OPPO and Hasselblad have jointly developed the camera hardware with the company highlighting ultra-high image quality and reduced dependence on artificial textures. The system will also use the second-generation Danxia colour system.

The Pro Max is tipped to use MediaTek’s first 2nm Dimensity 9600 Pro chipset. Its battery capacity is expected to be up to 8,000mAh with OPPO executive Zhuo Shijie claiming around five years of battery life for the Find X10 lineup.

OPPO Find X10E – Design, Colours, RAM and Storage

The OPPO Find X10E will come in Ice Blue and Light Titanium finishes.

Its rear design will be similar to the standard Find X10 with a rounded-square camera module housing three lenses. However, unlike the Find X10, the flash will be integrated into the camera module. The phone will also have a flat frame and rounded corners.

The Find X10E will be offered in 12GB+256GB and 16GB+512GB configurations.

OPPO has not yet revealed the chipset powering the Find X10E.

OPPO Watch S2 and Enco X4 Colour Options

OPPO will also introduce the Watch S2 and Enco X4 alongside the Find X10 series

The Enco X4 will come in Pink Gold, Soft White and Titanium Grey colour options.

The Watch S2 will be available in Vibrant Orange, Misty Powder and Mountain Shadow Grey shades.

With the launch scheduled for September 22 at 7pm in China, OPPO is expected to reveal the remaining details about the Find X10 series at the event.

Also Read –

https://www.mymobileindia.com/oppo-find-x10-and-find-x10-pro-max-get-gcf-certification-key-specs-revealed/

https://www.mymobileindia.com/oppo-find-x10-series-first-look-official-images-reveal-new-design-colours-ahead-of-september-22-launch

Highlights

• Vivo X500 tipped to feature 50MP main + 50MP ultra-wide + 64MP periscope telephoto cameras and likely powered by Dimensity 9600M.
• OPPO Find X10 expected with dual 200MP sensors (main + periscope) plus 50MP ultra-wide and could be using Dimensity 9600M as well.
• Honor Magic 9 may include dual 200MP setup and run on Snapdragon 8 Elite Gen 5.

The camera specifications of three upcoming flagship smartphones have surfaced online. The Vivo X500, OPPO Find X10 and Honor Magic 9 are expected to be part of September’s new smartphone lineup with all three reportedly focusing heavily on camera hardware.

Tipster Digital Chat Station on Weibo has also shared details about the chipsets expected to power these phones. According to the post, the Vivo X500 and OPPO Find X10 will use the Dimensity 9600M, while the Honor Magic 9 is expected to feature the Snapdragon 8 Elite Gen 5.

Vivo X500 Camera Specifications Tipped

According to the tipster, the Vivo X500 will feature a triple-camera setup. It is expected to have a 50-megapixel 1/1.28-inch main camera paired with a 50-megapixel ultra-wide-angle camera and a 64-megapixel 1/2-inch periscope telephoto camera.

The smartphone is tipped to be powered by the Dimensity 9600M, which the post describes as a mid-screen Dimensity 3nm chipset.

OPPO Find X10 To Feature Two 200MP Cameras

The OPPO Find X10 is also tipped to use the Dimensity 9600M chipset. However, its camera setup could be considerably more focused on high-resolution sensors.

The phone is expected to feature a 200-megapixel 1/1.4-inch main camera along with a 50-megapixel ultra-wide-angle camera. It could also get a 200-megapixel 1/1.56-inch periscope telephoto camera.

Like the Vivo X500, the Find X10 is described as using a mid-screen Dimensity 3nm platform.

Honor Magic 9 Camera Details

The Honor Magic 9 could offer a camera setup similar to the OPPO Find X10. The tipster claims that the phone will feature a 200-megapixel 1/1.4-inch main camera, a 50-megapixel ultra-wide-angle camera and a 200-megapixel 1/1.56-inch periscope telephoto camera.

Unlike the Vivo and OPPO models, the Honor Magic 9 is tipped to be powered by the Snapdragon 8 Elite Gen 5 chipset. The post describes it as a small-screen Snapdragon 3nm platform.

Based on the claims, the three upcoming smartphones could offer notably different approaches to camera hardware. The Vivo X500 is expected to use a lower-resolution but large 1/1.28-inch main sensor and a 64-megapixel periscope camera, while the OPPO Find X10 and Honor Magic 9 could stand out with 200-megapixel main and periscope cameras.

However, these specifications come from a tipster and have not been officially confirmed by Vivo, OPPO or Honor.

Also Read –

https://www.mymobileindia.com/oppo-find-x10-series-first-look-official-images-reveal-new-design-colours-ahead-of-september-22-launch/

https://www.mymobileindia.com/honor-magic-9-series-design-revealed-ahead-of-september-launch-arri-collab-confirmed/

Highlights

• iQOO 16 debuts Samsung’s “Everest” display, the first Android panel combining 2K resolution with 165Hz refresh rate and 30% lower power consumption.
• The display offers up to 10,000 nits local peak brightness, Dolby Vision certification, tri-ambient sensing, AR protector,and TÜV Rheinland eye-care certifications.
• It also features 500Hz multi-touch sampling, 5,000Hz instantaneous response, 3,300Hz PWM dimming and advanced eye health benefits from non-polarized light tech.

iQOO 16 is scheduled to launch towards the end of September and pre-bookings for the phone have already started. Meanwhile, iQOO has now confirmed a major display upgrade for its upcoming flagship smartphone.

Samsung Display and iQOO announced the partnership at a joint screen technology communication conference. The two companies introduced the “Samsung Display × iQOO Future Display Exploration Plan” with the first result of the collaboration set to arrive with the upcoming iQOO 16. Here’s everything we know about the new features.

iQOO 16 Gets Samsung Everest Display

The new panel is being marketed as the “Samsung Everest” display. It marks the Android debut of Samsung’s M16 luminescent material and is claimed to be the world’s first mobile display to combine 2K resolution with a 165Hz refresh rate.

The panel offers a 2K resolution with 508 PPI pixel density and supports a 165Hz refresh rate. iQOO says the high refresh rate has been optimised for various daily high-frequency usage scenarios. The display also maintains a 100% initial frame brightness ratio, which is designed to reduce motion blur when showing fast-moving content.

The Samsung Everest panel also introduces the 2K LEAD 2.0 display architecture. iQOO claims that this technology can reduce power consumption by 30% compared with standard OLED panels. The company also says the display consumes 31% less power than conventional 1.5K panels.

iQOO 16 With Up to 10,000 Nits Brightness

The iQOO 16’s Samsung Everest display will offer a manual peak brightness of 1,100 nits, while its global peak brightness can reach 2,800 nits. Local peak brightness goes as high as 10,000 nits.

The display uses an industry-exclusive tri-ambient light omnidirectional sensing system and comes with a pre-installed anti-reflective (AR) high-transmittance screen protector.

iQOO 16 ‘s viral images.

Each panel will also receive individual colour calibration. According to the newly revealed technical material, this improves brightness uniformity by 22% and colour uniformity by 40%.

The display covers 1.24x the DCI-P3 colour gamut and supports gaming colour gamut expansion technology and end-to-end true colour mapping. It has also received Dolby Vision certification.

iQOO 16 – 500Hz Touch Sampling and 5,000Hz Instantaneous Sampling

iQOO is further using its proprietary Q-Flex control technology for touch response, which operates at the game engine level. The system supports up to 500Hz multi-finger touch sampling and up to 5,000Hz instantaneous touch sampling with the aim of reducing system latency.

The display also supports up to 3,300Hz high-frequency PWM dimming along with full-brightness DC dimming. It has also received TÜV Rheinland Full Care Display certification and TÜV Rheinland Non-Polarized Light certification.

The panel uses a Non-Polarized Natural Light Display technology. According to laboratory measurements carried out in collaboration with the Second Affiliated Hospital of Zhejiang University School of Medicine and vivo Visual Health Lab, the technology showed a 50% improvement in eye redness, 85% improvement in tear film/eye lubrication and a 51% reduction in ciliary muscle tension.

The brand is expected to reveal more specifications and details about the phone’s market availability closer to the official launch.

Also Read –

https://www.mymobileindia.com/iqoo-16-first-look-revealed-ahead-of-china-launch-snapdragon-8-elite-gen-6-pro-and-100x-zoom-confirmed/

https://www.mymobileindia.com/upcoming-iqoo-16-vs-oneplus-16-camera-specs-showdown-200mp-vs-triple-50mp/

Highlights

• Xiaomi 18 global variant spotted on Singapore’s IMDA certification, confirming 5G, Wi-Fi, Bluetooth, and NFC support.
• It was earlier in the NCC listing that revealed 256GB/512GB storage options, IP68 rating and 100W fast charging.
• Xiaomi 18 series is expected to debut in China first with Pro/Pro Max launching first, followed by Xiaomi 18 and 18 Ultra.

It appears Xiaomi is currently preparing to add more smartphones to its numbered Xiaomi 18 series. The alleged global variant of the Xiaomi 18 has now appeared on Singapore’s IMDA certification database and it reveals the device’s earlier appearances on other regulatory platforms. Here’s everything we know so far.

Xiaomi 18 Global Variant Appears on IMDA

As per reports, smartphone carrying the model number 2611FPNFAG has been listed in Singapore’s IMDA database under the mobile terminals category. The listing describes it as a 5G mobile phone and confirms support for 5G, Bluetooth, Wi-Fi and NFC connectivity.

The certification does not mention the phone’s marketing name. However, several online reports suggest that the 2611FPNFAG model number could belong to the global version of the upcoming Xiaomi 18.

Xiaomi 18 Storage and Charging Details

The same model number had previously appeared on Taiwan’s NCC certification database. That listing revealed 256GB and 512GB storage options for the device. The two variants are reportedly expected to offer at least 198GB and 469GB of usable storage, respectively.

The NCC listing also revealed that the phone will have an IP68 rating, providing protection against dust and water.

The certification also mentions the MDY-19-EX charger model, which supports up to 100W wired fast charging.

The alleged global version of the Xiaomi 18 has also been spotted on Europe’s EEC certification database, where it appeared in July 2026.

Xiaomi 18 Series Launch Timeline

Xiaomi has recently launched the Xiaomi 18 Fold in China alongside the Xiaomi Pad 9 Pro Max. Both devices are powered by Xiaomi’s in-house XRING O3 chip. While the Xiaomi 18 series is expected to debut in China first, some of its models could later be introduced in global markets.

The Chinese smartphone brand is expected to follow a launch strategy similar to the previous Xiaomi 17 series.

Rumours suggest that Xiaomi could first introduce the Xiaomi 18 Pro and Xiaomi 18 Pro Max in China. The standard Xiaomi 18 and Xiaomi 18 Ultra are then expected to be launched together in the company’s home market. The Xiaomi 18 and 18 Ultra could eventually reach global markets soon after their Chinese debut.

As of now, Xiaomi has not officially confirmed the global launch details of the Xiaomi 18 series.

Also Read –

https://www.mymobileindia.com/xiaomi-18-global-launch-variant-appears-on-ncc-listing-100w-charging-confirmed-via-tuv/

https://www.mymobileindia.com/xiaomi-18-pro-max-and-pad-9-pro-appear-on-geekbench-snapdragon-chipsets-ram-and-performance-scores-revealed/

Highlights

• Vivo Y600i and Y600i AI Edition with model number V2617A certified with 44W fast charging.
• Another Vivo phone with model number V2620A is also certified with 90W charging, speculated to be part of the upcoming X500 series.
• Both certifications were issued on September 10, 2026 and hint at imminent launches.

The upcoming Vivo Y600i and Y600i AI Edition smartphones have appeared on China’s 3C certification database, revealing their charging capabilities. Both phones were spotted earlier on the Google Play Console Supported Devices list with the same model number and device code. It is suggestted that they could share similar specifications with the AI Edition offering more AI-focused features. The latest 3C listing now provides more information about their charging support.

At the same time, another unannounced Vivo smartphone has appeared on the certification platform, and it could possibly be part of the upcoming Vivo X500 series.

Vivo V2617A Gets 44W Charging Certification

According to the 3C certification listing, the Vivo V2617A is a 5G digital mobile phone that supports up to 44W wired fast charging. The device has been listed with the V4440L0B0-CN, V4440L0E1-CN and V4440L0F0-CN charger models. The certification was issued on September 10, 2026.

The 3C database does not reveal the phone’s marketing name. However, the same V2617A model number was previously linked to the Vivo Y600i and Vivo Y600i AI Edition through the Google Play Console Supported Devices list.

The earlier listing showed both smartphones with the same model number and device code. This suggests that the two models could have similar hardware, while the Y600i AI Edition may differentiate itself with additional AI-related features.

Another Vivo Phone Listed With 90W Charging

Alongside the V2617A, another Vivo smartphone carrying the model number V2620A has also appeared on China’s 3C certification database.

The Vivo V2620A has been listed as a 5G digital mobile phone with support for up to around 90W wired fast charging. The device was certified on September 10 and is listed with the V9082L0A1-CN, V9082L0E1-CN and V9082L0F0-CN charger models.

The certification does not reveal the marketing name of the V2620A. However, there is speculation that this could be a device from the upcoming Vivo X500 series. Similar charging specifications have previously been reported for the Vivo X500 Pro Max, while there is currently no other Vivo flagship lineup known to be in the pipeline.

This has led to speculation that the newly certified V2620A could belong to the X500 series.

More information about both newly certified Vivo smartphones is expected to emerge in the coming days.

Also Read –

https://www.mymobileindia.com/vivo-x500-hands-on-image-confirms-dimensity-9600m-chip-7500mah-battery-and-more/

https://www.mymobileindia.com/vivo-watch-6-and-buds-clip-to-launch-alongside-x500-series-on-september-21-x500-pro-max-unboxed/

Highlights

• Realme P4s Lite spotted on Google Play Supported Devices list, following BIS certification.
• It is expected to offer 4GB RAM with 64GB/128GB storage and Moonlight Silver/Nebula Black colour options.
• The phone could be positioned as a budget addition to the P4 lineup and priced around Rs 15,000.

It appears Realme may soon expand its P4 series in India with a new budget smartphone. The Realme P4s Lite has now appeared on Google Play’s Supported Devices list, adding to an earlier BIS certification for the device. Both developments suggest that the phone could be getting closer to its official India launch. Here’s what we know so far.

Realme P4s Lite Listed on Google Play

According to reports, the upcoming Realme P4s Lite with the model number RMX5398 has now been spotted on the Google Play Supported Devices list. The listing does not reveal any details about the phone’s hardware or specifications. However, its appearance on the platform suggests that Realme could launch the smartphone soon.

The device could potentially be unveiled later this month, although Realme has not confirmed any launch date yet.

The same RMX5398 model number was previously found on the BIS certification database. This certification further indicated that the smartphone is being prepared for the Indian market.

Realme P4s Lite Expected Specifications

Previous reports have suggested that the Realme P4s Lite will sit at the more affordable end of the P4 series. The phone is tipped to come with 4GB of RAM along with either 64GB or 128GB of storage.

The smartphone is also expected to be offered in Moonlight Silver and Nebula Black colour options. However, none of these specifications or colour options has been confirmed by Realme so far. The final hardware and other details could therefore be different when the phone is officially launched.

Realme already has several P4-branded smartphones covering different price ranges. The P4s Lite could therefore target buyers looking for a more affordable way to enter the P4 lineup. The phone could potentially be priced at around Rs 15,000, although there is no official pricing information yet.

Also Read –

https://www.mymobileindia.com/realme-p4s-lite-gets-bis-certification-in-india/

https://www.mymobileindia.com/realme-p4r-5g-india-launch-teased-with-dual-chip-could-debut-soon-under-rs-30000/

Higlights

• Vivo X500 hands-on image leak confirms Dimensity 9600M chipset running at 4.21GHz paired with 12GB RAM, 512GB storage.
• The phone will pack a 7,500mAh battery and feature a Sony LYTIA-828 main sensor with Zeiss gimbal stabilisation and a LYTIA-610 telephoto camera supporting 4K/120fps.
• It is set to launch on September 21 in China alongside the entire X500 lineup.

Vivo is set to unveil its X500 series lineup on September 21 at 7 PM in China. The brand has been gradually confirming several hardware details of the upcoming Vivo X500 Series. Previously, key details of the standard Vivo X500 were confirmed via an official teaser on Weibo. And now, a hands-on image of the same Vivo X500 has revealed several details that the brand has not officially announced yet. The information includes the phone’s chipset, RAM, storage and battery capacity.

Vivo X500 Hands-on Image Leaks, Confirm Dimensity 9600M Chip

A tipster account named Panda is Bald on Weibo has shared an image that shows the Settings screen of the Vivo X500 after getting hands-on with the device. The image gives a closer look at some of its key specifications.

According to the information visible in the hands-on image, the Vivo X500 will be powered by the Dimensity 9600M chipset. The chip is shown running at 4.21GHz across its eight cores.

The standard configuration of the phone will reportedly include 12GB of RAM and 512GB of storage. Vivo will also support virtual memory expansion of up to 24GB, while storage can be expanded by up to 50GB through compression.

The Dimensity 9600M is particularly interesting as this is the first mention or on-device confirmation of the chipset. The chip is likely based on the Dimensity 9500, which was previously rumoured to be rebranded for some 2026 flagship smartphones.

Vivo X500 to Pack 7,500mAh Battery

The same hands-on images also revealed that the Vivo X500 will be powered by a 7,500mAh battery. This gives another key detail about the phone ahead of its official launch.

Vivo X500 Camera Details

For photography, the Vivo X500 will use the same main camera sensor found on the X300 Pro. It is a Blueprint-branded Sony LYTIA-828 sensor measuring 1/1.28-inch. Vivo says this is the largest main camera sensor it has used on a standard X-series model.

The main camera will also feature Zeiss gimbal-level stabilisation and carry a CIPA 5.5 stabilisation rating.

The telephoto camera, meanwhile, has been borrowed from the X500 Pro. It will use the Sony LYTIA-610 sensor found in the Pro model’s APO telephoto camera setup. This camera also has a CIPA 5.5 stabilisation rating and can record 4K video at 120fps for slow-motion footage.

Vivo could also offer the standard X500 with support for a dedicated teleconverter. The compact accessory is designed to extend the phone’s telephoto capabilities. As for image processing, it will be handled by Vivo’s Blueprint V3+ imaging chip.

The brand will introduce the X500 series alongside several other products at the launch event on September 21st.

Also Read –

https://www.mymobileindia.com/vivo-x500-series-display-sizes-confirmed-ahead-of-september-21-launch-gets-sirim-approval-in-malaysia/

https://www.mymobileindia.com/vivo-x500-pro-max-design-with-four-colour-options-revealed-ahead-of-launch/

Highlights

• OPPO Find X10 series debuts globally on September 22 featuring Find X10, Find X10 Pro Max, Find X10E alongside Watch S2 and Enco X4.
• Official images reveal colours, Ice Blue, Clear Orange, Light Titanium, Moonlight and Warm Orange, reveal new designs of all models.
• Find X10 with a rectangular triple-camera island, Pro Max with a large Hasselblad-branded module and ultra-thin bezels.

OPPO has revealed the first official images of the Find X10 series ahead of its global launch on September 22. The company has been gradually sharing details about the upcoming phones including their camera hardware and display specifications and has now shown what the devices will look like.

The Find X10 series is already available for pre-reservation in China. The listing confirms three models in the lineup, the standard OPPO Find X10, OPPO Find X10 Pro Max and OPPO Find X10E. The brand will also launch the Watch S2 and Enco X4 alongside the smartphones.

OPPO Find X10 and Find X10 Pro Max Design

OPPO Find X10 and OPPO Find X10 Pro Max Teaser Posters. (Image credit – OPPO)

OPPO has shared official images showing the three Find X10 series models in different colour options. The Find X10 will be available in Ice Blue, Clear Orange and Light Titanium. The Find X10 Pro Max will come in Moonlight, Warm Orange and Light Titanium. And OPPO Find X10E will be offered in Ice Blue and Light Titanium colour options.

The Find X10 gets a design that is generally similar to the Find X9s Pro. It has a raised rectangular camera island with three large camera cutouts. The Find X10 Pro Max uses a noticeably different rear design, with a large black camera module covering much of the upper-left portion of the back.

The Pro Max also features a separate raised section on the right side for the flash and True Color camera. Hasselblad branding is placed along the left edge of the rear panel. Both phones come with a dedicated Snap Key on the side.

OPPO is also highlighting the thin bezels on the two models. The Find X10 has 0.99mm bezels, while the Find X10 Pro Max has 1.15mm bezels.

The Find X10 uses one-piece cold-engraved glass on the rear with OPPO calling the finish velvet glass. The Pro Max also features a glass rear panel, although its larger camera module is a major part of the phone’s overall design.

Images of the Find X10 Pro Max in the “White Moon” colour option and close-up images of the Find X10 have also surfaced.

OPPO Find X10 and OPPO Find X10 Pro Max side-by-side design comparison with Find X9 Pro and iPhone 17 Pro Max. (Image credit – OPPO)

Side-by-side images of the Find X10, Find X10 Pro Max and iPhone 17 Pro Max have also gone viral. Another comparison shows the OPPO Find X9 Pro alongside the new Find X10 Pro Max.

OPPO Find X10 Series Camera and Other Specs

Several camera details of the Find X10 series are already known. The standard Find X10 will feature two 200-megapixel sensors with one serving as the primary camera and the other as a telephoto camera.

The Find X10 Pro Max will offer three 200-megapixel cameras, covering the same triple-lens setup.

Both phones will use the Hasselblad Ultra-Clear Original Camera setup. This system is built around a second-generation Danxia colour restoration lens that collects light and colour information across 24 sampling channels.

OPPO has also confirmed details about the display technology. The company has worked with Tianma on a new OLED panel called Tiangong Screen 2.0. The panel is designed to reduce blue-light exposure while improving performance at low brightness levels.

The Find X10 will have 0.99mm bezels on all four sides. OPPO says this is the thinnest bezel design it has achieved on a Find series smartphone. For comparison, the Find X8 had 1.45mm bezels, while the Find X9 had 1.15mm bezels.

The phone will also feature an 8,000mAh battery, which OPPO says is rated to hold up through more than five years of regular use.

The OPPO Find X10 and Find X10 Pro Max have appeared on Geekbench with the model numbers PMW110 and PMX110, respectively. The listings also reveal that the two models will use different chipsets.

The Find X10 is listed with a MediaTek MT6993 chip. It has four cores running at 2.70GHz, three cores at 3.50GHz and a prime core reaching up to 4.21GHz. The chipset is paired with a Mali-G1-Ultra MC12 GPU, which lines up with the Dimensity 9500. The Find X10 Pro Max is listed with the MT6995, which is MediaTek’s first 2nm chip. It is widely expected to launch as the Dimensity 9600 Pro.

Both Geekbench listings show 16GB RAM and Android 17. However, the software on these devices is still pre-release, so the final benchmark numbers could change by the time the phones launch.

OPPO Find X10 Series Storage Variants

The OPPO Find X10 Pro Max will be available in four configurations including 12GB + 256GB, 12GB + 512GB, 16GB + 512GB and 16GB + 1TB.

The OPPO Find X10 will also be offered in four variants: 12GB + 256GB, 12GB + 512GB, 16GB + 512GB and 16GB + 1TB.

The OPPO Find X10 E, meanwhile, will come in two variants: 12GB + 256GB and 16GB + 512GB.

The OPPO Find X10 series is set to make its global debut on September 22, when more details about the lineup are expected to be revealed.

Also Read –

https://www.mymobileindia.com/oppo-find-x10-pro-max-global-variant-gets-imda-certification-india-launch-also-tipped/

https://www.mymobileindia.com/oppo-find-x10-and-find-x10-pro-max-get-gcf-certification-key-specs-revealed/